Australian Sourdough Super Tasty!

I mixed up a batch of sourdough using my Australian Sourdough Starter. This starter is my husband’s very favorite flavored starter besides the motherdough breads. I decided to use the Two Night Super Sour recipe but make it a one night instead. Well I ended up changing the flour in the recipe too.

In the evening:

  • I started with 2 cups of vigorous Australian Starter at 166% hydration (one cup flour to one cup water).
  • 2 cups of warm water
  • 1 cup Rye flour
  • 1 cup Whole Wheat flour
  • 2 cups Bread flour

I mixed this together as a sponge and let it set at room temperature overnight.

preferment

Next morning I added the prefermented mixture to my mixer and then added:

  • 1 cup warm water
  • 2 Tablespoons Oil
  • 5 teaspoons salt
  • 5 cups Bread flour (approximately)

I mixed the ingredients together and then let the dough rest for 15 minutes. I then kneaded the dough for an additional three minutes. The dough was doubled in 6 hours. I then had my daughter shape the loaves because I was very busy working on my car. I came back in to check on how she had done and realized something I had not considered before. I took it for granted that she knew how to shape loaves. She didn’t. She had basically gotten them into shape enough to put into the bannetons. The dough was flat in the baskets. Almost like it had been poured in. So I took out the dough and showed her how to shape the loaves so that the loaves had an outer skin of dough pulled around the outside and pinched together to form like a casing so that the bread could raise itself up and not turn out flat. If you don’t know how to do this, get some good books on baking which will show you. Jefferey Hamelman’s book on bread comes to mind, he has some great illustrations showing how to shape loaves.

Anyway, the loaves were reshaped and placed in banneton baskets:

shaped loaves

The shaped loaves raised for two hours and then slashed and baked:

slashed

The loaves were two large loaves weighing over two lbs each. They came out great!

Here is the first one:

first loaf

first loaf

Here is the crumb for the first loaf:

crumb

Here is the second loaf:

second loaf

This dough was easy to handle and not too sticky. The crust texture and color came out really great. The crumb is soft and open, and the flavor, as always, is unspeakably delicious. Australian Sourdough starter has an old world flavor that is hard to describe. It is also nicely sour.

Advertisements

Coaxing the Sour

Sometimes it seems as if you just can’t get the “sour” you want out of your starters. Yes, last Summer there was no problem, now it takes more work to get a good sour flavor. I am not sure why this is myself, I wonder if it is just the overall cooler temperatures of flour, starter, house and some people bake less, so the starter is left in the refrigerator most of the time. When I leave my motherdough starter in the refrigerator all of the time, it is a sweeter, fuller wheat flavor, definately not a more sour flavor.

Anyway, I have been working with the San Francisco starter and decided to try and coax the sour from it. I have been having moderately sour breads coming from this starter, and really great flavor and vigor. I started with a thicker preferment and fermented it for 18 hours keeping it at around 70 – 72 degrees. It looked like this:

preferment

I then mixed in te rest of the ingredients and let the dough ferment for four more hours and then shaped the dough:

shaped dough

Then I put the loaves into the refrigerator overnight for 12 hours. I couldn’t get too many pictures of the process as one of my sons was using my camera to make “Lego movies” and the camera was taped down! Anyway, next morning I took out the loaves and staggered them so they would bake at different times. I had five loaves at not quite 1.5 lbs each. Here are the results:

all five loaves

more loaves

more

more loaves

I sliced the one which didn’t get a good oven spring so we could try it out, it was the only one that came out a bit on the flattish side, here is the crumb:

crumb

I made the loaves on the small side so I could share with neighbors and friends as I have been getting a few hints lately 🙂  The bread came out with a terrific texture and already has a sharp taste even though the sour usually takes a couple of hours of cooling to develop completely. Although I feel the experiment with timing was successful, I do think it was at its limit. It did take a lot of high heat to get a good color with me keeping the oven at 450 longer than usual and I noticed that some of the crust was trying to tear in places, if you look closely you can see this. The dough was also more sticky than usual for the stage and hydration it was at. I think the gluten was right at the limit of trying to break down. I am thinking of doing the initial preferment at 12 hours at a warm temperature instead of 18 to see what the outcome would be. It seems to me that if you want to control the “sour” more, you might need a proofing box to help you keep the temperatures at a steady predictable warmth.

Pane Teresa Bread… Holey

Pane Teresa bread is so good! I love this bread. It is so unique… it is made differently than other breads. When you are done, you have a flat piece of dough…which transforms into a light fluffy loaf full of holes. It starts like this:

The motherdough that is used is very active and full of bubbles, if it isn’t, you won’t make good bread.

motherdough

Then you mix up the dough and let it set overnight, this is after mixing and before Autolyse:

preferment

This is after Autolyse and final mixing:

autolyse

The dough is refrigerated overnight and taken out the next day to warm up. It is then divided. I divided it into three pieces which weighed almost 2 lbs each.

divided dough

The dough is very wettish and hard to work with. Here is a closeup of the dough resting in preparation for shaping:

dough piece

The dough is then shaped and placed into Bannetons:

shaped loaves

They then proof for two hours. I put one of the loaves onto the cool porch to slow it down so all of the loaves wouldn’t be ready to bake at the same time. I also preheated the oven for a long time. The house was cold anyway, so I gave it a good two hours. I had layered two baking stones together for a lot of heat when the dough was placed on the stone.

Here is the first loaf, it didn’t reach the full potential that the next loaf did:

first loaf

The next loaf was larger although the same weight:

second loaf

Here are the two together:

two loaves together

Here is the third loaf, it turned out magnificent:

third loaf

This is the crumb from the second loaf:

crumb

Here are all of the loaves together:

all three loaves

The fragrance of this bread is heavenly! The crumb is soft and moist, the crust crisp and crackly. This is a really terrific loaf to bake up and always a surprise when it springs up in the oven and is so full of holes!

Desem Sourdough Day

I started a preferment the day before yesterday with my Desem starter, but had to go into town yesterday so I wasn’t able to mix it up and bake. Instead, I took out my preferment and did a build on it adding half again the amount of dough I had. Then I put it into the cold pantry overnight. In the morning it was very light and airy. So I put it in the mixer and doubled the weight of the preferment making about four lbs of dough. The dough was light and spongy after four hours, and had risen higher than any of my other Desem doughs so far. So I shaped it and put it in the couche:

shaped Desem

dough in couche

Boy did we have a full kitchen today. It was hard to fit in the bread baking schedule. My daughter made cream puffs and potato croissants (boyfriend coming over). I had to put my Desem loaves on the top of the stove to get some warmth and I put a wet cloth over the loaves. One of the loaves actually had the top crust(which was turned upside down) heat up, dry out and stick to the cloche, which never happened before. I had to spray it with water to get it off and then I noticed the outside layer, which was touching the stovetop through the couche, was actually a bit cooked! I decided to slice down through the middle to try to save the loaf. It actually  came out pretty nice:

first loaf of Desem

The lighter color on the top of the crust is where the dough dried and cooked.

 The next loaf was also dried out on the top crust from the heat of sitting on top of the stove and stuck to the couche. I was able to peel off the couche and get the loaf onto the stone. I also made one long lengthwise slice on the top of the loaf to try to save the loaf. I don’t think any other slices would have worked as the whole top crust was dried out and somewhat cooked. I didn’t  realize it was that hot on top of the stove when I set the loaves on a grate on top of the couche on the stovetop. But we had been using the stove for hours and it was just hotter than I realized. It also came out nice anyway:

Desem loaf 2

Here are the two finished:

Desem two loaves

I don’t have any crumb pictures yet, but will tomorrow. They are still too hot to slice!

I am so glad I tried Desem bread. I never knew Whole Wheat bread could taste so good! It is moist, chewy, with a hard to describe full fermented wheat flavor of toasted wheat and maltiness. There is no added malt, but you sure taste it, especially when you toast the bread. My children that don’t usually like Whole Wheat bread (most of them) love the Desem bread. It never fails to be tasty and wonderfully sour!

Here are the pictures of the crumb:

crumb

San Francisco Starter Experiments

Today I baked up a lower hydration dough using the San Francisco starter. I made a preferment from a motherdough of 80% hydration and let it set for 18 hours.

fermented dough

Then I added more flour and water to the batch and fermented it 6 more hours. After that I added the salt and rest of the flour and water and mixed it to a somewhat stiff (for me) dough. 

 stiff dough

 I let this set for two hours to raise and then put it into the refrigerator overnight. In the morning I let the dough warm up for two hours, shaped, proofed and baked.

first loaf

second loaf

Here is the first loaf:

first loaf baked

Here is the second loaf:

second loaf

both loaves

I used the roasting lid again to obtain a superior crust. It worked great! You could hear the crackle of the crust as it cooled.  The batch is a great success with  a terrific flavor and crisp crust. I served it with fresh butter and Turkey soup.

Here is a picture of the crumb which I took the next day. It is a lower hydration dough, so not too holey:

crumb

How About Lid Baking?… My Best SF Loaf Ever!

Well, here it is…. my best San Francisco Sourdough Bread ever!

Best Loaf

But I am getting ahead of my story!

It started like this… I took out my San Francisco Starter from the refrigerator and warmed it up and fed it for several days. My last blog was on trying a SF technique from the manager of the Boudin Bakery of San Francisco. I felt that the starter I prefermented was too warm for too long and so I decided to do a shorter preferment at 72 degrees. I kept my eye on it and when it was super bubbly and doubled, I went ahead and mixed up the dough. I then let the dough ferment for another four hours at which time I shaped the loaves and put them into the refrigerator overnight:

divided dough

shaped and in baskets

Next morning I took out the dough and let proof for two hours:

proofed

I had shaped one batard style loaf and two boules, they were two lbs 2 oz each.

After two hours proofing and one hour preheating my oven, I baked the first loaf:

first loaf

Crumb of first loaf

crumb

It came out pretty nice with a great crust and the crumb is nice too. Then I baked the second loaf which was a boule:

boule, loaf two

It came out okay, but I wanted a better color to the crust and bloom to the slashes. So I decided to take out my large roasting lid used for the Turkey pan and preheat it and use it to cover the last loaf:

Roasting lid

What was neat is that the bread was still slid onto the stone first, sprayed once, and then covered by the lid. I had heated up the oven to 500 degrees. As soon as I had placed the lid and shut the door, I turned down the oven to 425 degrees and left the lid on for 15 minutes. After the fifteen minutes were up, I took off the lid and turned the loaf around. It already looked awesome! Here it is all finished:

Best SF loaf

Side view

Well, anyway, as you can see, the color is terrific! The crust is also wonderfully chewy, and crispy. There are some drawbacks for me to baking in a pot, although I do like it. I must say, there are no drawbacks to the lid method, at least I haven’t found any yet! Having the loaf sit right on the stone and have the close steam generated by the lid covering it, has given me one terrific San Francisco Sourdough Loaf!

Here is the crumb:

crumb

 I will write up the technique and recipe and put it into the Special Recipe folder. Have a great day baking sourdough, I know I did!

A Tale of Two Sourdough Batches

I started with some sourdough starter which I kept at 72 degrees for 24 hours. I was following a technique I found on this site by Fernando Padilla, Plant Manager of Boudin Bakery in San Francisco, Ca.  http://www.exploratorium.edu/cooking/bread/recipe-berkeley.html

I was trying to obtain some results the same as Boudin Bakery, which as everyone knows is the most famous Sourdough Bakery probably in the world. Anyway, I then used the starter the next day and mixed up a batch of dough using the recipe provided. Except that I often like to hold out on using the salt until after the Autolyse or rest period for the dough. So I made up the dough and did Autolyse. The dough was looking great. It had that just perfect feel to it. I then added the salt and stirred down the dough with the mixer. Shock! Disbelief! Before my very eyes, the dough fell apart and turned into a gooey mess! I did not mix for more than four minutes, so I knew I hadn’t overmixed. I had made a batch earlier in the week that did the same thing right after I added the salt which was Morton Iodized Salt by the way. Now I don’t know if it was the salt or the prefermented stage of warming the starter or what actually caused this gooey mess. The earlier batch I had made was so bad it had to be thrown out. I decided to save the present ruined batch until tomorrow and see if I could do anything with it, so I refrigerated it. Next, I decided to try again, but instead of using a starter which was kept warm for 24 hours, I used my motherdough which I always feed and keep in the refrigerator at 80% hydration. I mixed up the batch using the exact same recipe, only using the motherdough and a different salt this time. I had some sea salt which is what I used. After autolyse, I added the salt and the dough was wonderful.The only problem was that I now had two large bowls of dough at around 6 lbs each as I had quadrupled the recipe. Tweleve pounds altogether, approximately.

two bowls of dough!

I left them out in the cold pantry which was around 40 degrees (yes, we have snow and ice laying out in the yard in Coastal Washington ! ) overnight. Next morning I brought the first ruined batch in to let it warm up. It was all full of bubbles and looked very active. Once it warmed up I poured it out and folded it a couple of times to see if I could build some strength in the gluten. It ended up feeling like a Ciabatta dough around 75 – 80 percent hydration.

Ciabatta dough ?

I kept it well covered in flour and decided to shape some Ciabatta loaves with it. What could I lose?  My other alternative was to throw it away anyway! So I shaped it like Ciabatta and got four nice sized loaves weighing approximately 1.5 lbs each:

Ciabatta loaves

I was very unsure what would happen to this dough, as it may have acted like an 75% hydration dough, but it had a lot more flour in it than a dough at 75& would have.

I proofed the loaves for 2 hours and baked them and here is what I got:

Baked loaves

The interior was not at all holey:

Crumb

Here are the rest:

the rest of the loaves

Believe it or not the bread was scrumptious! I got raves on it. I served it buttered with broiled Ling Cod and mixed veggies.

Now onto the next batch which I had taken out of the cold room an hour after the other bowl of ruined dough and was working with alongside with. Here is how nice the dough in the second batch looked:

second batch dough

It was soft, bubbly and terrific dough to handle. I divided into three pieces and shaped the loaves which I placed in a couche:

divided dough

dough in couche

I let this dough proof while the first dough was baking. When the other dough was done and it was ready I baked them one by one. Here are all three loaves finished:

finished loaves

I was trying to obtain a bread similar to the Boudin Bakery bread. I was asked if my starters could make bread like theirs. I went to their site and looked up “Boudin” and that is how I found the recipe and technique. I also signed up to be a customer as I thought it would be great to have some sent in the mail to see what it really tasted and looked like. No go for me. At around 30.00 for two loaves, once they figured in shipping, it was too steep a price for me! I will have to visit them someday when I head on down the Coast and pick up a loaf or two! So I still don’t know if I even approached near to their quality, but I aspire to do so, as I am sure many sourdough bakers do. Here is a closeup of the crust on one of my loaves:

crust closeup

Here is a picture of the crumb:

crust

I was surprised at how similar this recipe turned out to be to my own Basic White recipe. It made me feel like I am on the right track. Anyway, the second batch of bread turned out very delicious, with a chewy, crisp, crust and soft, holey crumb. Any bread made with the motherdough smells super, out of this world wonderful.

So this is the tale of two batches of dough, mixed up on the same day, following the same recipe and two VERY different results. This is a good lesson on, “If you follow a recipe and don’t get the same results as the author, don’t always blame the recipe,”(or the author as a matter of fact). Have a great day trying to bake the best sourdough ever!

%d bloggers like this: